Product Description
Only 1 left!
Easy & Efficient
The FastFerment System is a one-stage fermenter, which allows brewers & winemakers to do primary & secondary fermentation in the same unit. FastFerment eliminates racking & transferring between buckets & carboys. This saves approximately 80% of the time & labour needed to make a batch of beer or wine compared to traditional methods & with less equipment, clean up is easy.
Gold Medal Winner
FastFerment is a Gold Medal Winner at the Largest Homebrew Competition - HomebrewCon 2016 in Baltimore, MD - Other Ales Category
80% Less Work
No Racking & No Transferring & only 1 vessel to clean means less work and more brewing!
Premium
FastFerment is a professional system for the average Homebrewer & Winemaker.
The conical design limits exposure to oxygen & allows for yeast harvesting.
The end result is consistent high quality batches of beer & wine every time.
Benefits Over Traditional Conicals
The downfall of other conical fermenters is that you have to ferment the product with the valve closed and then the trub & sediment accumulates above the valve. When the fermentation is complete you have to open the valve and flush the sediment out the bottom. This results in two main issues:
You need to time the flushing of the sediment perfectly to ensure minimal loss of product.
As the sediment is flushed out, there will always be yeast and trub/sediment hazes that float up back up into your beer or wine.
Highlight Reel - Bigger is Better!
Most Affordable 14G Conical Available
Built on the Gold Medal winning design of the 7.9G FastFerment
Heavy Duty
+33% Thicker vessel & collection ball than the 7.9G FastFerment
+33% Thicker stand than the 7.9G FastFerment
+33% Larger valve than the 7.9G FastFerment
Save £100s & harvest your yeast strains with the Collection Ball
(Spigot & Thermometer for 7.9G work for the 14G as well. Sold separately)
Kit Contents
14 US Gallon / 53 Litre Conical Fermenter
Large Screw Top Lid with Hollow Silicon Gasket
Rubber Grommet & 3-Piece Plastic Airlock
Bottom Collection Ball for Harvesting Yeast
Teflon Seated Union Valve with Fittings
Solid Tubular Steel Stand with Assembly Screws
PVC Hose & Hose Clamp
Stainless Steel Thermowell
Permanent Stainless Steel
Teflon Tape
Step by Step Instructions & Best Practices Manual
Why FastFerment?
Guaranteed consistent batches with no trub/sediment contamination
Primary & secondary fermentation in one vessel
80% less work with no transfers & no racking
Increased sanitation with less oxygen exposure
+40 000 FastFerments sold to date
Specifications
Conical Body & Collection Ball
+33% Thicker than the 7.9G FastFerment
Food Grade HDPE
Collection Ball Volume - 40.6 oz / 1200ml
1.5" 3.8 cm Teflon Seated Valve
+33% Larger than the 7.9G FastFerment
All BPA Free Plastics
Heights
To top of airlock: 41.7" / 105.9 cm
To top of Lid: 38.2" / 97 cm
Widths
Conical Body: 18.6" / 47.2 cm
Stand Rings: 18" / 45.7 cm
6" / 15.2 cm Screw Top Lid with Hollow Rubber Gaskets
This is the same lid as the 7.9G FastFerment and our newest rubber hollow gasket that creates the perfect seal every time
14 US Gallons / 53 Litres
Total capacity including the Collection Ball
1.5" / 3.8 cm Teflon Seated Union Valve with Fittings
47" / 12 mm diameter legs & .55" / 14 mm diameter rings
+33% thicker than the 7.9G FastFerment Stand
Exterior Volume Markings on Vessel and the Collection Ball
½" diameter hose for fast keg filling
Stand Weights: 12.5 lbs 14G Stand / 7.4 lbs Stand Leg Extension Kit
